Robustel M1000 XP User Guide Bedienungsanleitung PDF herunterladen (Seite 23)

Robustel GoRugged M1000 XP User Guide

RT_UG_M1000 XP_v.1.0.0 19.11.2013 22 / 57

Confidential

Connect

Connect the M1000 XP Configurator to the gateway, which

will use the PC’s local RS-232 port.

Disconnect

Disconnect the M1000 XP Configurator to the gateway and

release the PC’s RS-232 port.

Read

Read gateway’s current settings.

Write

Save changes into gateway.

Note: Some parameters changes need to reboot to take

effect.

Default

Set gateway to default factory settings.

Reboot

Reboot the gateway.

Exit

Exit the M1000 XP Configurator.

Disconnecting

Gateway is not communicating with M1000 XP

Configurator.

Connecting

Gateway is communicating with M1000 XP Configurator.

Serial Management Settings

Show the current RS-232 management communication

parameter.

TCP Management Settings

Show the current TCP management communication

parameter.

Versions

Show the gateway’s current firmware version.

Important Notice

You must save your parameter changes by clicking “Write” button and then reboot your M1000 XP by clicking

“Reboot” button to take effect for the parameter changes.

3.5 Export and Import Profiles

Users could export gateway settings from one gateway, and then import the same settings to other gateways, which

makes it convenient to carry out “mass deployment” and “pre-configuration”.

1. Select Export from the Settings menu. Then select a folder and enter the file name for the profile. Click on Save,

then it will popup “Export Succeed” windows.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Keine Kommentare

Robustel M1000 XP User Guide Bedienungsanleitung Seite 23